Dovpo Ember 80 Kit Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dovpo Ember 80 Kit. Dovpo Ember 80 Kit 8 pagina's.

17. Low-resistance Protection activates when resistance is
below 0.08Ω
18. High-resistance Protection activates when resistance is
above 3.00Ω
19. Overcharging Protection
OPERATION GUIDE
1. Turn on the device by pressing the fire button 5 times
in 1.5s
2. Wake/Sleep
The display will dim itself after 30s of no activity, press
any button to wake up the device.
The device will turn off after 30 minutes of no activity,
the display will show "BYE DOVPO".
3. Turn off the device by pressing the fire button 5 times in
1.5s
4. Mode Switch
Hold both "+" and "-" buttons for 1.5s to switch between
working modes from Wattage Mode to Temperature
Control(Ni), Temperature Control(Ti) and Temperature
Control(Ss).
For example, when in Wattage Mode, Hold both "+" and
"-" buttons for 1.5s to switch to Temperature Control (Ni),
release the buttons and hold again to switch to the next
working mode.
BYE DOVPO
2
80.0w
0.00V
0.00Ω