Dovpo Guardian 1.5 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dovpo Guardian 1.5. Dovpo Guardian 1.5 16 pagina's. Temperature control

Operation Guide

8.Celsius and Fahrenheit Setting

When in Ni200/Titanium temperature control mode, change from Fahrenheit to

Celsius by scrolling to the minimum temperature setting. Then press the "-"

button once more to switch to the opposite mode.

9.Lock the Initial Resistance

9.1 When in Ni 200 coil / Titanium coil temperature control mode, after you put a

new atomizer into the device you should press and hold both "+" and "-" button

to lock the initial resistance. See picture 9.1. To read a correct resistance value

please ensure the Nickel coil or Titanium coil is under ambient temperature

before activating the Guardian 1.5; There is no need to lock the initial resistance

if it's a same atomizer.

9.2 When in wattage mode, when you put a new atomizer and press the fire button

the device will read the resistance and firing, there is no need to lock the initial

resistance.

SET RESISTANCE

0.21

Picture 9.1