Amphony 2500 Gebruikers- en installatiehandleiding - Pagina 4

Blader online of download pdf Gebruikers- en installatiehandleiding voor {categorie_naam} Amphony 2500. Amphony 2500 12 pagina's. 5.8 ghz digital wireless headphones
Ook voor Amphony 2500: Gebruikers- en installatiehandleiding (13 pagina's), Vergelijking van functies (1 pagina's), Productinformatie (4 pagina's), Veelgestelde vragen (5 pagina's), Specificaties (4 pagina's), Handleiding voor probleemoplossing (5 pagina's)

User and Installation Guide

Step 2

Placing the transmitter

The operating range essentially depends on how many obstacles there are

between the transmitter and the headphones. Therefore, it should be carefully

considered where to place the transmitter.

Below, two examples are given. In the first example, there are 4 walls between

the transmitter and the receiver. The transmission may be interrupted. By

locating the transmitter such as in the second example, reliable transmission

to all of the 6 rooms is possible.

Also, the elevation of the transmitter as well as the presence of reflecting walls

will influence the range.

It is suggested to experiment in order to find the best location for the

transmitter.

If sufficient coverage cannot be achieved by changing the location of the

transmitter, then the use of RangeBooster transmitters is suggested. These

RangeBooster transmitters are available as an accessory for your 2.4 GHz

Digital Wireless Headphones from Amphony and can be located in areas

where signal reception is difficult. RangeBooster transmitters connect to the

DATA OUT output of the transmitter and receive the signal in a digital format

without any degradation. Any number of RangeBooster transmitters can be

used to extend the operating range almost indefinitely.

Example 1: Poorly chosen

transmitter location

Example 2: Improved

transmitter location

R R

Page 3