Dowco FISHINI Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dowco FISHINI. Dowco FISHINI 7 pagina's. Bimini top

STEP 1

Take eye strap and hold it up to the inside frame of the windshield.

Remember that there is glass inside the aluminum frame. The eye strap

needs to be high up on the aluminum channel to avoid the glass.

STEP 2

Carefully drill one hole using the 9/64 drill bit per the desired location

of the eye strap. DRILL ONLY THROUGH THE METAL FRAME OF THE

WINDSHIELD FACING YOU, NOT ALL THE WAY THROUGH.

STEP 3

Using the #10 x 1/2" long screw, add Blue Loctite

secure the eye strap to the aluminum frame of the windshield.

STEP 4

Position the eye strap, then drill second hole, using the 9/64 drill bit.

STEP 5

Install 2nd #10 screw in the new hole.

STEP 6

Repeat first (5) steps on other side of walk-thru.

STEP 7

Attach rifle straps to D-rings on frame by hold-down arm.

STEP 8

Attach other end of rifle strap to the newly-installed eye straps.

If you are mounting the eye strap to something other than the windshield frame, use the #10 x 1" long oval head sheet metal screws

(included in the hardware kit).

FISHING ROD STORAGE

Your Fishini top may have an overhead fishing rod storage system. Locate the four elastic loops , and four at the front, to store a fishing rod,

insert the rod handle end into the elastic loop at the front of the top. Unfasten the velcro loop at the back, place the rod against the top and

secure the velcro strap. Your fishing rod will stay secure, stored under the top, until your ready to use again.

YOU HAVE NOW SUCCESSFULLY COMPLETED THE INSTALL OF YOUR FISHINI TOP!

to threads and

EYE STRAP

D-RING

142780-00 | 03/18