Amplicomms TCL 190 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Amplicomms TCL 190. Amplicomms TCL 190 16 pagina's. Analogue alarm clock with cordless vibration pad

Pagina afdrukken

Preparing the Equipment

4. Connect the equipment as illustrated in the diagram.

Only use the telephone connection line supplied

because the equipment may not function if another

telephone connection line is used.

Vibration pad

Mains power outlet

In order to connect the alarm clock to a telephone

connection for use as a signal amplifier, you may need

an appropriate adapter. You can obtain one at a

specialist shop.

Only use the power adapter plug supplied labelled with

output data 12 V

0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)

Telephone line socket

, 670 mA.

Basic settings

In order to be able to use the TCL 190 alarm clock, you must first

carry out the following settings.

1. Set the time. Turn the rotary knob (15) until the clock shows

the correct time.

2. Set the time at which the alarm should go off. Turn the rotary

knob (14) until the red hand points to the time at which the

alarm should be triggered.

3. Use the sliding switch (7) to select the type of alarm (mode).

There are three settings available, from left to right vibration

only", acoustic signal only" or acoustic signal + vibration".

4. Turn the rotary knob (4) to set the required volume. Firstly,

set the volume to quiet" (turn anticlockwise) and increase

the volume slowly.

Exposure to the alarm at full volume for a long period could

cause ear damage.

5. Turn the rotary knob (5) to set the required acoustic signal.

6. Turn the rotary knob (3) to set the required pitch for the

acoustic signal.

Use the rotary knobs for volume and pitch to select

settings whereby the alarm can serve its purpose with the

volume setting as low as possible. Depending on your

hearing, it is possible that you can detect higher or lower

pitch tones even at low volumes.

7. In order to activate the alarm to trigger at the set time, turn

the rotary knob (3) clockwise to On".