Caraudio-Systems TV-Free TF-MFD2 Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Caraudio-Systems TV-Free TF-MFD2. Caraudio-Systems TV-Free TF-MFD2 6 pagina's. Video-in-motion interface for audi rns-e, volkswagen mfd2/rns2 and skoda nexus navigation systems
Pagina afdrukken
Instruction for VW Golf 5, Touran and Skoda with MFD2/RNS2/Nexus:
1. Remove decorative plastic panels of the navigation
computer carefully, remove the 4 TORX screws and pull the
navigation computer out of the centre console.
2. Disconnect Quadlock connector from the backside of the
navigation computer and connect it to harness TV-VW01. If
the original Quadlock connector carries 12pin inserts,
disconnect the inserts and connect them to harness TV-VW01.
Connect TV-VW01 to the navigation computer.
3. Activation of the video-in-motion function
On vehicles with RNS-E navigation system the video-in-
motion function is activated by long-pressing the "next
track" button when in TV-mode. As confirmation, the
head-unit's button illumination will blink a few times
slowly. Repeat to deactivate, confirmation are a few fast
blinks. After ACC is switched off, the video-in-motion
function will be automatically deactivated.
Note: While the video-in-motion function is active, the navigation will not work!
On vehicles with MFD2/RNS2 and Nexus navigation systems the video-in-motion function is
activated permanently without disturbing the navigation performance.
Version 13.09.2012
TF-MFD2