Caraudio-Systems TF-MYGIG Handmatig - Pagina 3
Blader online of download pdf Handmatig voor {categorie_naam} Caraudio-Systems TF-MYGIG. Caraudio-Systems TF-MYGIG 5 pagina's. Video-in-motion interface
Pagina afdrukken
1.2.
Check compatibility of vehicle and accessories
Requirements
Vehicle
Navigation
1.3.
Setting the Dip-switches of the Can-Box TV-500
Vehicle/ navigation
Video-in-motion permanent
Video-in-motion selective*
* With dip1 to OFF the included green cable is used to activate the video-in-motion function.
Note: Dip switch functions of the TV-500
Dip 1 – activation TV-free
Dip 2 – no function
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
1.4.
Pin-assignments
Pin-assignment vehicle connector
Cable colour
○●
White/Orange
○
White
●
Red
●●
Black/Green
Pin-assignment of the CAN-Box TV-500 (Molex 8pin)
Cable colour
Pin-No. Assignment
●
Yellow
Pin 4
●
Blue
Pin 3
●● Yellow/Black Pin 8
●● Blue/Black
Pin 7
●
Red
Pin 1
●
Black
Pin 5
●
Green
Pin 6
●
White
Pin 2
Version 19.07.2017
Chrysler, Dodge, Jeep
MYGIG RER/REW/REN/REP/RHW and UConnect (Jeep) navigation
systems
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
ON
OFF
OFF
OFF
Assignment
CAN-HIGH - Pin 13
CAN-LOW - Pin 2
+12V Permanent - Pin 1
Ground - Pin 12
CAN-HIGH – connection to the head-unit
CAN-LOW – connection to the head-unit
CAN-HIGH – connection to the vehicle
CAN-LOW – connection to the vehicle
+12V permanent
Ground
Activation of the video-in-motion function
(+12V = TV-free activated)
No Function
OFF
OFF
ON
ON
OFF
OFF
ON
ON
TF-MYGIG