CombiSteel 7450.3650 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CombiSteel 7450.3650. CombiSteel 7450.3650 19 pagina's. Cabinets

Maintenance and cleaning

Switch the cooler off at the socket.

The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet with a light

soap solution and subsequently wipe dry. External surfaces can be maintained using steel oil.

Remove the condenser filter (see fig. 2.1), and clean it with a vacuum cleaner and if necessary a light soap

solution.

Fig. 2.1

Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the stainless steel

surfaces and the internal cooling system.

Clean the condenser and the compressor compartment using a vacuum cleaner and a stiff brush. Do NOT hose

the compressor compartment with water as this can cause short circuits and damage on the electrical parts.

The cooling system is a hermetically sealed system and does not require supervision, only cleaning.

If the cabinet fails to cool, check if the reason is a power cut.

If you cannot locate the reason to the failure of the cabinet, please contact your supplier. Please inform model

and serial number of the cabinet. You can find this information on the rating label which is placed inside the

cabinet in the top right hand side.

Disposal of the cabinet must take place in an environmentally correct way. Please note existing

regulation on disposal. There may be special requirements and conditions which must be

observed.