Doxmand SR2 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Doxmand SR2. Doxmand SR2 2 pagina's. Starling alarm
Thank you for choosing one of our quality products! The functions and handling of the device are described below. Proper use
is a prerequisite for reliable operation, so please read and follow the operating, storage, and safety instructions carefully before
installation! Keep this manual in order to help you later! If you have any questions about the device, please contact our customer
service. It would be an honour for us if you would continue to offer our product to others.
The Doxmand team wishes you a successful starling alert!
IMPORTANT SAFETY INFORMATION BEFORE USING THE DEVICE
1. GENERAL WARNINGS
Read carefully this manual before using the device and keep it
for future use as well! The different products supplied with the
different accessories may differ!
You must always comply with the basic safety standards in your
own interest!
Improper use of the device is dangerous!
After removing the packaging, make sure that the device is not
damaged!
If you see any damage on the device, do not use it, send it back!
Keep the packaging materials out of the reach of small children
because these are dangerous!
The manufacturer or distributor assumes no responsibility for
any damage, personal injury, damage resulting from improper
use or improper storage, or for malfunctions resulting from
repairs by unauthorized people!
The malfunctioning device may only be repaired by a specialist
designated by the manufacturer or distributor! Never try to
repair your device at home!
If you notice a malfunction in the operation of the device,
contact your service centre for assistance!
2. TECHNICAL CHARACTERISTICS OF DOXMAND SR2 STARLING ALARM
Alarm frequency:
1 kHz to 5 kHz
Piezoelektronic speaker:
2 pieces
Alarm range:
100m; ~ 2 hectares
Interval between alarms:
0.3 to 12 minutes
Alarm duration:
2-15 sec
Dimension:
300 x 300 x 105mm
Weight:
1200g
Operating temperature:
(-)15 – (+)50 °C
Volume:
max 130dB
3500 mAh
Li-ion battery:
3.6V
Polycrystalline solar panel:
2,0 W
Dear Customer!
Use of this device is not recommended for children under 8
years of age!
The device may be used by children over the age of 8 years or
by persons with reduced physical, sensory, or mental abilities
under supervision, provided that they are informed of the safe
operation of the device and the dangers involved!
Do not use the device if you or a person near you are suffering
from seizures!
Do not use the device if you or a person near you are sensitive
to high tones!
Do not let children play with the device!
Cleaning and maintenance by the user must not be performed
by children without supervision!
Always check the device before use. Do not use the device if it
is malfunctioning, as this may cause injury!
Do not attempt to replace the battery of the device!
Do not attempt to disassemble the device!
Do not attempt to remove some parts of the device (e.g. solar
panel)!
Use and store the device at the temperature described in the
technical parameters!
Do not immerse the device in water!
3. EU DECLARATION OF CONFORMITY
The EU Declaration of Conformity for this product is
available
at
the
following
email
4. ELECTROMAGNETIC FIELDS (EMF)
This device complies with the standards for electromagnetic
fields (EMF). If it is operated in accordance with the
instructions, according to the state of art, the device is safe.
5. DATA OF MANUFACTURER
Doxmand Hungary Ltd.
HU-9096 Nyalka, Kossuth út 73.
Hungary
www.doxmand.hu │ [email protected]│+36-30-692-8785
2 / 4
1. GENERAL INFORMATION
The Doxmand SR2 Alarm emits squawk like sounds that make starlings and other pest birds feel in danger, so they do not even
attempt to land in the affected area, thus protecting the crop. The installation of the device is simple and requires no special
expertise. The energy required for the alarm is provided by a solar cell on the unit.
Randomly generated sounds cause birds to leave the affected area in search of a different habitat. The unit alarms only during
daytime and automatically shuts off at night.
By pressing the button on the bottom of the device, you can set how often the device should alarm. The alarm can be randomly
triggered at any time within the set maximum time. It is a good idea to set this timeline as large as possible so that birds will be less
likely to know the device too well.
2. APPLICATION INSTRUCTIONS
2.1. INSTALLATION:
Step 1: Fixing the bracket to the ground post.
Step 2: Fixing the device to the bracket using the supplied wing nut.
Step 3: Powering on.
To use the Doxmand SR2 Starling Alarm, follow these steps:
1.Positioning the device:
Place the device so that it is at least 1m above the plant to be protected. Placement can be done on a ground post or picket, making
sure that the solar panel is always exposed to sunlight and that there is nothing to prevent the sound from spreading. First, screw
the supplied bracket onto the post and then secure the device to the bracket with the supplied wing nut.
2.Power on:
Use the button at the bottom of the unit to turn it on, which will indicate the battery status with the first 1-3 beeps after power on,
then it starts the alarm, followed by the timer setting with 1-3 beeps in different sounding tone.
The states of charge indicator (first 1-3 beeps at power-on)
•
3 beeps
Charged status
•
2 beeps
Medium charged status
•
1 beep
Low power, waiting for sunshine
In the event of one beep, the device no longer alarms, thus preventing the Li-ion battery cell from discharging excessively, which
address:
could cause damage. It will resume operation after the next sunny period. THE SOLAR PANEL CHARGES THE BATTERY ONLY WHEN
IT IS TURNED ON!
IMPORTANT!
It is advisable to remove the protective film placed on the solar panel before the first use of the device, since after a while the
sun can burn it on, which can make it difficult to remove and it may influence the proper energy uptake!
3. CLEANING AND MAINTENANCE
IMPORTANT! Do not immerse the device in water! Do not use a strong detergent, abrasive scrubber to clean the appliance! Clean
the device with a damp, soft cloth. Over time, the solar cell may become whitish and become scale-coated, affecting the power
supply of the device. It is therefore advisable to wipe it occasionally, for example by cleaning it with a recommended WD-40 or
limescale cleaning agent
4. STORAGE
IMPORTANT! When using the device periodically, please comply with the appropriate storage conditions for longer lifetime! If the
battery charge is too low or too high, you can shorten the battery life. Its storage temperature is recommended between (-)20 and
(+)25 °C. Always use the device off when not in use, in a closed environment!
USER MANUAL
3 / 4