DOYLE 58778 Gebruiksaanwijzing & veiligheidsinstructies - Pagina 3

Blader online of download pdf Gebruiksaanwijzing & veiligheidsinstructies voor {categorie_naam} DOYLE 58778. DOYLE 58778 4 pagina's. Cradle drill press vise

Pagina afdrukken
Mounting Instructions
WARNING! TO PREVENT SERIOUS INJURY: Verify that installation
surface has no hidden utility lines before drilling or driving bolts.
1.
Place Vise on flat, solid surface
capable of supporting weight
of Vise and workpiece.
2.
Using Vise as template, mark
four mounting holes.
Operation Instructions
1.
Pull out the Safety Pin (6). Turn Angle
Fixing Handle (3) counterclockwise to
loosen. Adjust Vise to desired angle.
Turn Angle Fixing Handle clockwise
to tighten. Insert the Safety Pin.
Note: The Stop Bolt Assembly (5)
is to ensure the Vise stops at zero
degrees at the full down position.
Maintenance
1.
Keep moving parts lubricated. Wipe off
excess lubricant on Handle and Jaws.
2.
Keep Jaws clean. Remove Jaws for
cleaning by removing Screws (8).
Parts List and Diagram
Part
Description
1
Spindle/Handle
2
Guide Rail
3
Angle Fixing Handle
4
Insert
5
Stop Bolt Assembly
6
Safety Pin
7
Base
8
Screw
9
Jaw Insert Assembly
10 Screw
11 Movable Jaw
12 Vise
Item 58778
Qty
1
1
1
1
1
1
1
7
4
1
1
1
1
6
For technical questions, please call 1-888-866-5797.
3.
Drill appropriated size holes
for bolts (sold separately).
4.
Secure Vise with appropriate bolts,
washers and nuts (sold separately).
2.
Turn the Spindle/Handle (1)
counterclockwise to open
the Jaws of the Vise.
3.
Place the workpiece inside the Jaws.
4.
Tighten Jaws against the workpiece
by turning the Spindle/Handle
clockwise until workpiece is held
securely inside the Jaws.
3.
Periodically, check and tighten
mounting hardware.
9
8
5
10
12
2
3
4
11
8
1
Page 3