Dahua HAC-HDBW2401RP-Z Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dahua HAC-HDBW2401RP-Z. Dahua HAC-HDBW2401RP-Z 16 pagina's. Hdcvi

3 Installation

Dome camera mainly uses ceiling installation; installation surface includes ceiling and wall.

Users can install the device with the installation position map and the screws in the

accessories bag.

Attention:



Please install the device in time after it is taken apart, which is to avoid the camera

module being exposed to damp environment for too long.



Before the installation, please make sure the installation surface is thick enough to

sustain at least 3X weight of the camera.



For the installation mode of side outlet, make sure the direction of side outlet is in

accordance with that of the installation position map when sticking the installation

position map. Besides, pull the cable through the pedestal cable slot before locking

the screw.

Note:

The installation figure is for reference only.

Step 1

Take out the installation position map from the accessories bag, and paste it on the ceiling or

wall according to the cable exit location, dig holes on the installation surface according to the

installation position map, take out the expansion bolts from the accessories bag and insert

them into the installation holes and fix them.

Step 2

Use the wrench to loosen the locking screw in the cover and take down the cover.

Figure 3-1