Dahua Technology DSS7016D DR-S2 Handleiding bijwerken - Pagina 4
Blader online of download pdf Handleiding bijwerken voor {categorie_naam} Dahua Technology DSS7016D DR-S2. Dahua Technology DSS7016D DR-S2 11 pagina's.
Pagina afdrukken
1
Updating from V1.001 to V8.0.2
This chapter introduces the applicable version and update procedures from V1.001 to V8.0.2 for
DSS4004-S2 and DSS7016D/DR-S2.
1.1
Applicable Version
Product
DSS4004-S2
DSS7016D/DR-S2
There might be risk if you update the program. Make sure that you back up the data before update to
avoid failure and data corruption.
1.2
Update Instructions
Refer to the following .xlsx file for the situations before and after update.
Update Note.xlsx
1.3
Update Methods
Non-applicable versions cannot be directly upgraded to V8.000.0000002.0. You need to upgrade
to the applicable versions first (see "1.1 Applicable Version"), and then to V8.000.0000002.0. If
you upgrade to V8.000.0000002.0 directly, the system prompts an update failure. The data will
not be replaced, and the original version remains after the service restarts.
You cannot update when hot standby is configured. Remove the hot standby before updating
to V8.000.0000002.0.
After update, you need to reconfigure distributed deployment.
After update, the program cannot be downgraded to earlier versions.
Downgrade or update among different programs is not supported. For example, you cannot
update DSS7016D/DR-S2 to DSS4004-S2, or update DSS4004-S2 to DSS7016D/DR-S2.
Applicable version
V1.001.0000000.2
V1.001.0000001.2
3
Applicable Program Name
General_OverseasDSS4004S2_Eng
_Basic_V1.001.0000000.2.R.202012
17.tar.gz
General_OverseasDSS7016S2_Eng
_Basic_V1.001.0000001.2.R.202012
11.tar.gz
Update Guide
Target
Version
V8.0.2
V8.0.2