Boozhound Laboratories JFET Montagehandleiding - Pagina 4

Blader online of download pdf Montagehandleiding voor {categorie_naam} Boozhound Laboratories JFET. Boozhound Laboratories JFET 5 pagina's.

These boards have traces only on one side, leaving the bottom side to be nothing but a huge ground plane. This will

reduce grounding problems and make this a very quiet design.

I also made the gap between the ground plane and the pads really huge so that it would be hard to accidentally ground

out a component. I tend to use a soldering iron tip until it is far from pointy, so the spacing helps me keep everything

tidy.

The points where the components do attach to the ground plane will take a bit more heat to solder properly since the

ground plane will act as a heat sink.

Next install the capacitors. Or instead of "next" I should say "last" because you are done!

The only thing left to do is visually inspect the solder joints to make sure everything looks good and there are no solder

bridges or obvious cold solder joints.