Doyson S 10 FM Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Doyson S 10 FM. Doyson S 10 FM 2 pagina's. Control module with bluetooth
WIRING DIAGRAM FOR S 10 FM BT CONTROL
MODULE AND UC 100 S CENTRAL UNIT
System with central unit
0
=
GROUND - Vcc
5
=
POWER SUPPLY 12 +Vcc
8
=
COMMUNICATIONS
9
=
COMMUNICATIONS
C1 R
=
RIGHT CHANNEL 1
C1 L
=
LEFT CHANNEL 1
CABLE REF. W-8
MINIMUM SECTION
2X1MM
6X0,25 MM
M
9
C1R
C1L
2x0,75 mm.
MAINS 230 Vca.
NOTE.- The
UC 100 S
be controlled. For higher installations, power supply units or a more powerful central unit would be required.
Connect the 'M' in case of mixed systens where units with call function have been installed (control modules with microphone or CN500 microphone desk)
SYSTEM PROGRAMMING
Once all the system units are already installed, a zone number must be assigned to each control module as follows:
< >
1st.- Keep the keys
2nd.- Choose the control module you want to be the "zone 1" and press the on/off key. The number "1" will be memorized as a zone number in
that control module.
3rd.- Now the rest of control modules will show the leds flashing. Choose again which control module you want to be the "zone 2" and press the
on/off key of that module. Repeat the process as many times as control modules/zones are in the installation.
4th- Once the zone assignment is finished, keep the control module on/off key pressed during 2 or 3 seconds in order to leave the "assingnment
zone mode".
STEREO
ZONE
Speaker
Ref. SP 5
CABLE REF. W-2
MINIMUM SECTION
2X0.50 MM
+
-
8
5
0
0 5 8 9 M C1L C1R
UC 100 S
ANTENNA CONNECTION: Conductor wire of 80 cm. In zones of
bad reception, connection to outdoor antenna it is highly recommended.
supports a máximum of 10 sound control modules and a maximum distance of 100 mts.of cable to the last element to
pressed during 4 seconds. The leds of every control module will be flashing at this point.
System with power supply unit
-
+
100-240 Vca.
R+ R- L- L+
ANT
S 10 FM BT
For AUXILIARY CONNECTION of audio, TV, PC, etc. please
use 0 (ground) and C1L and C1R (Left and right channel 1)
STEREO
ZONE
Speaker
Ref. SP 5
CABLE REF. W-2
MINIMUM SECTION
2X0.50 MM
+
-
MAINS
0 5 8 9
5
0
Power supply
unit
FA 12 BI
-
+
M
C1L C1R
R+ R- L- L+
S 10 FM BT