Comcast TV DIGITAL SET-TOP BOX Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Comcast TV DIGITAL SET-TOP BOX. Comcast TV DIGITAL SET-TOP BOX 20 pagina's.
Ook voor Comcast TV DIGITAL SET-TOP BOX: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
Coax Cable Connection
Connect & Power Up
1. Connect the 6-ft. coax cable from your cable wall outlet to the Cable In/RF In connection on the back of
your Digital Set-Top Box.
2. Connect the 3-ft. coax cable from the To TV connection on the back of your Digital Set-Top Box to the Cable
In/RF In connection on the back of your TV.
Is your connection different? Information for alternate connections is available in this section of your User Guide.
3. Plug the power cord into the back of your Digital Set-Top Box, then into an electrical outlet.
Allow 20 minutes for your Digital Set-Top Box to warm up before beginning activation. Messaging will display
on the screen when the Digital Set-Top Box is ready to be activated.
4. Turn your TV on.
5. Place the batteries into your remote control. Press Cable and then Power. Don't worry if you don't see a
picture on your TV right away, as you'll have full access to XFINITY TV after your service is activated.
6. To program your remote, locate the booklet that came with your remote control and follow the instructions.
You can do this now or later.
7. Do you have other kits to set up? If so, do that now. If not, go to page 20 to activate your service.
Cable Wall Outlet
Cable In/RF In
SA VID USER SIK 0112.indd 17
Digital Set-Top Box Connection
Back of TV
Cable In/RF In
1
2
Coax Cable
To TV
Back of Digital Set-Top Box
Electrical Outlet
3
Coax Cable
Power Cord
Power
17
12/21/11 2:19 PM