Comcast ON DEMAND M1067BX3 Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Comcast ON DEMAND M1067BX3. Comcast ON DEMAND M1067BX3 2 pagina's. Comcast dvr custom 3 device universal remote owner's manual
Pagina afdrukken
FeatUres and
FUnCtiOns
Use the remote control' s mode keys
(i.e., aUX, tv, or Cable) to control
Comcast Custom dvr
a specific device. When pressed, the
3 device
selected mode key will light, confirm-
ing your choice. Use the other keys to
perform desired actions (see the fol-
lowing key chart).
NOTE: The selected mode will remain
active until you press another mode key.
Press aUX, tv, or
Cable once to select
and control a device.
Press Power once to
turn on or off the
selected home enter-
tainment device.
Use setup for all
programming
sequences.
Press all On once to
turn on or off all
programmed devices
in this order: Cable,
User guide
tv, and aUX. After
all devices are on,
Overview
Cable is the active
mode.
The Comcast Custom DVR 3-Device
universal remote will control up to
three home entertainment devices,
Press On deMand
including a Digital Video Recorder
once to access
enabled Cable Box (used by Comcast
Comcast' s ON
Systems).
DEMAND menu (not
The remote control requires installing
available in all areas).
two (2) new AA batteries (included)
and some easy programming to con-
In the aUX or tv
trol your devices. For best results,
mode, use the trans-
please read and perform all instruc-
port keys to control a
tions listed here. Also, keep this guide
VCR, PVR, or DVD
for future reference.
player. To record a
program on a VCR,
press reC twice.
installing Batteries
In the Cable mode,
1.
Pull back the remote control' s
battery cover and remove it.
use the keys to control
2.
Insert the two (2) supplied AA
ON DEMAND pro
batteries according to the + and
grams.
- marks in the battery case.
3.
Push the battery cover back into
Press rePlaY to
place.
replay the previous
4.
Test the unit by pressing any
few seconds of a pro
mode key (i.e., aUX, tv, or
Cable).
gram.
If batteries are inserted correctly,
the selected mode key will light.
Press My dvr to
NOTE: When batteries need replacement,
show a list of prog
the remote control will stop operating.
rams that have been
Replace the old batteries and the unit will
recorded.
be restored to its full functionality, complete
with your favorite settings.
Press LIVE to return
to watching live TV.
M1067BX3.indd 1
Use the keypad (0 ~
Use A, B, or C to
9)to directly select the
access interactive
channels (e.g., 09 or
functionality on your
031).
cable box.
In the tv mode, use
Use Page+ (or Page–)
to page up (or down)
this key to switch the
TV' s input to view TV
through menu screens
or video programs.
and the interactive
In the aUX mode,
program guide.
use this key to switch
Use Guide to display
the interactive
the VCR, PVR (or
program guide.
DVR), or DVD player
to view TV or video.
Use these keys to
move the cursor in
For an audio device,
the interactive pro-
use it to switch to an
gram guide and menu
input source.
screens.
Use OK (select) to
Use Hd/ZOOM
select menu options,
to change the aspect
PPV events, and
Ration on HD
programs from the
Receivers.
interactive program
Use the PIP Function
guide.
keys to operate the
Use info to display
PIP functionality of
current channel and
your converter and
TV (If Available)
program information.
Use Menu to display
PrOgraMMing deviCe
the Quick Menu (on a
COntrOl
Motorola Cable Box),
The Comcast Custom 3-Device univer-
or to access settings
sal remote control is preprogrammed
(on a Scientific
at the factory to operate the Cable Box
supplied by your Comcast system, an
Atlanta Explorer,
RCA TV, and an RCA VCR (in the aUX
Pioneer Voyager, or
mode). To control devices other than
PACE cable box).
default brands (excluding the Cable
Box), perform the below steps; other-
Use exit to exit the
wise skip this section:
menu or guide.
1.
Turn on a device (e.g., VCR or
Use Help to access
DVD Player) and, if applicable,
digital cable help.
insert media, (e.g., video cassette or
disc).
Use last to recall the
last channel or go back
NOTE: Please read steps 2 to 6 com-
one screen in the menu.
pletely before proceeding. Highlight or
write down the codes and device you
Use vOl+ (or vOl-)
wish to program before moving on to
to raise (or lower) the
step 2.
sound volume. Also
2.
On the remote control, press a
see Changing Volume
device key once (i.e., aUX or tv).
Lock.
aUX
NOTE: Use the
key to program
Press Mute once to
control of an Audio Amplifier or
turn sound off or on.
Receiver, a DVD Player, a Home-
Theater-In-A-Box Device, a PVR (or
In the Cable mode,
DVR), or a VCR.
press Fav once to
Press and hold setup until the
3.
display programmed
selected mode key blinks twice,
favorite cable channels.
then release setup.
Use CH+ (or CH-) to
4.
Locate the code for your device
select the next higher
in Manufacturer' s Codes on the
(or lower) channel.
back of this user guide. Brands are
listed in alphabetical order with
When controlling a
the most popular codes listed
DVD player, use CH+
first.
(or CH-) to skip
5.
Enter the first five-digit code for
forward (or skip
your device. If you perform this
procedure correctly, the selected
reverse) through
mode key will blink twice.
video.
NOTE: If you enter an invalid code,
CHeCKing tHe COdes
the selected mode key will display one
long blink and exit the programming
If you have set up the remote control
mode. Repeat steps 2 to 5 with a valid
using the Searching For Your Code
code.
procedure, you may need to find out
which five-digit code is operating your
6.
Aim the remote control at your
device and press Power once.
equipment. Perform the following steps
after setting up your devices to find
The device should turn off. If it
out which five-digit code operates your
does not respond, repeat steps 2
equipment. For example, to find out
to 6, trying each code listed for
which code is operating your TV:
your brand until you find one
that works. If it still does not
1.
Turn on your TV.
work, try Searching For Your
On the remote control, press tv
2.
Code.
once. Then press and hold setup
NOTE: If the device does not have a
until the tv key blinks twice,
Power
Play
key, press the
(
) key.
then release setup.
Enter 9 - 9 - 0. The tv key will
3.
blink twice.
7.
For future reference, write your
device code in the appropriate
4.
To view the code for the first
boxes below:
digit, press 1 once. Wait 3 sec-
aUX Code:
onds and count the number of
times the TV key blinks (e.g., 3
blinks =3) and write down the
number in the left most TV Code
box (at end of this section).
Device Type:______________
NOTE: If a code digit is "0", the
tv Code:
selected mode key will not blink.
5.
Repeat step 4 four more times for
the remaining digits. Use 2 for the
second digit, 3 for the third digit,
8.
Repeat steps 1 to 7 for another
4 for the fourth digit and 5 for the
device you want to control.
fifth digit. Finish writing down the
code in the TV Code boxes (at end
searCHing FOr YOUr COde
of this section).
If your home entertainment device does
6.
To check another device code,
not respond to the remote control after
repeat steps 1 to 5, but substitute
trying all of the codes listed for your
the aUX key for the auxiliary
brand, or if your brand is not listed at
device you are checking. Write
all, try searching for your code.
down the codes in the appropri-
ate boxes below:
For example, after trying all of the
codes for your TV, you still cannot get
aUX Code:
the remote control to operate your TV,
then:
1.
Turn on your TV.
Device Type:______________
On the remote control, press tv
2.
once. Then press and hold setup
tv Code:
until the tv key blinks twice,
then release setup.
Enter 9 - 9 - 1- 1. The tv key will
3.
blink twice.
CHanging vOlUMe lOCK
Note: Substitute 1 with 0 if
The Comcast Custom 3-Device univer-
searching for a Cable code, 2 if
sal remote control is set at the factory
searching for a DVD, VCR or
to control the TV volume in all modes.
PVR and 3 if searching for an
Audio device
However, you may change the Volume
Lock setting to Individual Volume
4.
Press Power and aim the remote
Unlock to unlock a specific device' s
control at the TV and press CH +
volume controls for independent
one or more times until the TV
operation in its own mode (e.g., Audio
turns off.
Receiver volume controls in the aUX
NOTE: In the search mode, the
mode).
remote control will send IR codes
Or, if desired, you can perform Global
from its library to the selected device,
Volume Unlock so that the volume
starting with the most popular code
controls of all devices can be indepen-
first.
dently operated in their own modes.
Press setup once to lock in the
5.
Unlocking volume Control For a
code.The tv key will blink twice.
single device (individual volume
6.
To search for the codes of another
Unlock):
device, repeat steps 1 to 5, but
substitute the aUX key for the
1.
Press a desired mode key where
auxiliary device you are searching
you want volume to be unlocked
for.
(e.g., aUX) and controlled within
its own mode.
Press and hold setup until the
2.
NOTE: This feature does not affect the
selected mode key blinks twice,
mode.
then release setup.
de-activating Channel Control
Enter 9 - 9 - 3 and then press
3.
lock
vOl- once. The mode key will
blink four times confirming
1.
On the remote control, press
Cable once. Then press and hold
unlock.
setup until the Cable key blinks
4.
If desired, repeat steps 1 to 3 (of
twice, then release setup.
this section) for each device that
Enter 9 - 7 - 3. Press CH- once.
you want volume to be unlocked.
2.
The Cable key will blink four
5.
Now, after you select a device that
times.
has volume unlocked (e.g., aUX),
pressing vOl+, vOl-, or Mute,
3.
Now, the remote control will
will control the device' s volume
provide TV or cable channel
only in its own mode.
control capabilities while in the
tv or Cable mode.
Unlocking all volume Controls
re-activating Channel Control
(global volume Unlock):
lock
Press and hold setup until the
1.
1.
On the remote control, press
selected mode key blinks twice,
Cable once. Then press and hold
then release setup.
setup until the Cable key blinks
Enter 9 - 9 - 3 and then press
twice, then release setup.
2.
vOl+ once. The mode key will
Enter 9 - 7 - 3. Press CH+ once.
2.
blink four times confirming
The Cable key will blink twice.
unlock.
3.
Now, volume controls for all
3.
Now, regardless if you select
devices can be independently
the tv or Cable mode, only the
controlled in their own modes.
channel control capability of your
locking volume Control to tv
cable box will be accessible.
or aUX Mode:
trOUBlesHOOting
Press and hold setUP until
1.
the Red light flashes twice, then
PROBLEM: A mode key does not
release setUP.
blink when you press a
Enter 9 - 9 - 3 (Red light will
key.
2.
flash twice).
SOLUTION: Replace the batteries
Press and release either tv or
with two (2) new AA bat
3.
teries.
aUX (Red light for selected
device will flash twice).
PROBLEM: During programming, a
mode key displays one
long blink.
reassigning deviCe KeYs
SOLUTION: An invalid entry has
occurred. Check the key
With the Comcast DVR remote, you
to be entered and try
can easily decide what device you want
programming again.
to add under the AUX mode.
PROBLEM: A mode key blinks
For example, to have the unit control
when you press a key,
a TV, a Cable Box, and second TV all
but home entertainment
you need to do is enter in the TV code
component does not
as follows:
respond.
On the remote control, press aUX
1.
SOLUTION: Make sure the remote
once. Then press and hold setup
control is aimed at your
until the aUX key blinks twice,
home entertainment
then release setup.
device and is not farther
than 15-feet away.
Enter 1-0-0-4-7
2.
PROBLEM: The remote control does
3.
The aUX key is now ready to be
not control home enter-
programmed for your second
tainment devices or the
TV. See Programming Device
commands are not work-
Control for instructions.
ing properly.
PrOgraMMing CHannel
SOLUTION: Try all listed codes for
the device brands being
COntrOl lOCK
set up. Make sure they
can be operated with an
By default, the remote control' s chan-
infrared remote control.
nel-control capabilities are locked to
the Cable Box. The affected keys are 0
~ 9, CH+, CH-, enter, and last.
This will guarantee that you do not
inadvertently change a channel while
in the TV mode. However, you can
turn off this feature to allow full access
to these keys in the tv and Cable
modes.
3/28/2007 8:10:20 AM
aUX
Fold