Carbest 82282 Gebruiksaanwijzing - Pagina 16
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Carbest 82282. Carbest 82282 20 pagina's. Pure sine-wave inverter
Ook voor Carbest 82282: Gebruiksaanwijzing (13 pagina's)
Pagina afdrukken
UK
Carbest Sinus-Wechselrichter | Sinus Power Inverter 82282/82283/82284/82285/82286
WARNING:
The installation of a fuse must be on positive cable. A missing fuse on the positive cable
between the inverter and battery may cause damage to the inverter and will void warranty.
INVERTER OPERATION
To operate the power inverter, turn the main switch ON, the power inverter is now ready
to deliver AC power to your loads. If there are several loads, turn them on separately after
the inverter has been ON in order to prevent an electrical overload.
• Set the power switch to the ON position and the buzzer will send out Beep sounds at
the moment the inverter will do self-diagnosis. Then the power status LED indicators
will also show various colors, finally the buzzer will sound another Beep and the power
status LED indicators will turn to green color. The inverter starts working successfully.
• Set the power switch to the OFF position, the inverter stops and all the lights will go off.
TROUBLESHOOTING
WARNING:
Do not open or disassemble the inverter. Attempting to service the unit yourself may
result in a risk of electrical shock or fire.
Problems &
Symptoms
No AC power
output
and status
illuminates
the red LED
Possible cause
Over input voltage (OVP)
Low input voltage (UVP)
Thermal shutdown (OTP)
Short circuit or wiring error.
Over load (OLP)
16
Solutions
Check input voltage, reduce
input voltage.
Recharge battery, check connec-
tions and cable
Improve ventilation. Make sure
ventilation openings in inverter
are not obstructed. Reduce
ambient temperature
Check AC wiring for short circuit.
Reduce load.