BOQU SD Series Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} BOQU SD Series. BOQU SD Series 15 pagina's. Online colormeter

Step 2：Open the upper cleaning seal cover，Carefully clean

the inner wall of the measuring glass tube with a brush（Pay

attention not to overflow the water from the cleaning port,

which will cause the water to seep into the circuit board of the

measuring tank）。

Step 3 ： Repeat the second step repeatedly until the colored

substance adhering to the inner wall of the glass tube is

removed。

Step 4：Cover the measuring box, clean the sealing cover, and

power on。

8. Matters needing attention

The first start-up of the system takes 10 minutes to warm up 。



Incoming line voltage must be within the allowable range，Wiring



of incoming terminal must be firm and reliable

It is strictly prohibited to use in places with explosion,



flammability, corrosion of metal, damage of insulation and steam。

Maintain the original assembly mode of water inflow and water



outflow. The internal measurement is precision glass tube. Do not

use too much force when changing the installation, which will

cause the glass tube to break.

This test method is a national standard platinum cobalt



colorimetry, which can not necessarily meet the needs of on-site

chroma. It is suggested that the darkest color solution on site can

be used as the standard solution for sample mixing according to

Operating instructions for SD Series Online Color Meter