Dahua Technology DH-PFS5452-48GT4XF-400 Snelstarthandleiding - Pagina 13
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dahua Technology DH-PFS5452-48GT4XF-400. Dahua Technology DH-PFS5452-48GT4XF-400 20 pagina's. 52-port managed gigabit l2+ switch
Pagina afdrukken
3
First Login via Console Port
Login by console port is the most basic way to log in the local interface, and it is also the
method to configure other ways to log in the switch. You can see the command line manual for
details.
Step 1
Power off the PC.
Step 2
Use default console port cable to connect PC and the switch.
First insert the DB-(hole) plug of console port cable into the 9-pin serial port of PC, and
then insert the RJ45 plug into the console port of the switch.
Confirm the sign on the port during connection, in case it may plug into the wrong
port.
Plug out RJ45 and then DB-9 when dismantling console port cable.
Step 3
Power on the PC.
Step 4
Run terminal simulation program on the PC, and then select the serial port which is to
connect the switch, and set the terminal communication parameters.
The following parameter values have to be in accordance with the values on the switch,
the default are shown as follows.
Baud rate: 115200
Data bit: 8
Stop bit: 1
Parity: None
Flow control: None
If the PC uses Windows Server 2003 operating system, please add super terminal
program in the Windows component and then log in and manage the switch
according to the way introduced in this manual.
If the PC uses Windows Server 2008, Windows Vista, Windows 7 or other
operating systems, please prepare third-party terminal control software, refer to
the software operation guide or online help for operation method.
Step 5
The device is powered on, it displays device self-check information on the terminal
control software, and it will prompt users to press Enter key after self-check, then it will
display username and password input prompt.
Step 6
Input username and password, and then press the Enter key.
The default username is admin, and the default password is admin.
Figure 3-1
Login via console port
8
User's Manual