Ampro TECSHOW QUADBAR 18 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ampro TECSHOW QUADBAR 18. Ampro TECSHOW QUADBAR 18 8 pagina's. 18 led washer wall light bar
Pagina afdrukken4. CLEANING
•
Cutting the power source when the light is cool,
to move the cover of the light
•
Using the vacuum cleaner or the gas from air
compressor to remove the dust of the appearance
of the strobeflood
•
The lens need clearly once every week, otherwise
to reduce the bright.
5. DMX SIGNAL CONNECTIONS
ATTENTION:
DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE! RISK OF SHORT CIRCUIT!
•
Be sure to follow figures 2 & 3 when making your
own cables.
•
Do not connect the cable's shield conductor to
the ground lug or allow the shield conductor to
come in contact with the XLR' s outer casing.
CONDUCTOR
GROUND/SHIELD
DATA COMPLIMENT (-SIGNAL)
DATA TRUE (+SIGNAL)
NOT USED
NOT USED
P. 4
English Version | Tecshow QUADBAR 18
3-PIN XLR TO 5-PIN XLR CONVERSION
3Pin XLR Female (OUT)
Pin 1
Pin 2
Pin 3
DMX-512 OUT
3-PIN XLR
IN
•
The fans need clear once every month, to
promise the cool effect.
•
Clearing the lens must be take care, because the
surface of the lens is easy to damage and cutting,
and do not use the liquid to clean.
•
The PCB do not use the liquid to clean, must be
keep it dry, to avoid short circuit.
•
Grounding the shield could cause a short circuit
and erratic behaviour.
5-Pin XLR Male (IN)
Pin 1
Pin 2
Pin 3
Pin 4-Do Not Used
Pin 5-Do Not Used
DMX-512 IN
3-PIN XLR
OUT