Amprobe ACD-10 PRO Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Amprobe ACD-10 PRO. Amprobe ACD-10 PRO 17 pagina's.

HOLD

The hold feature freezes the display for later viewing. Press the HOLD button

momentarily to activate or exit this feature.

MAX

The max feature compares and displays the measured maximum value as fast as 30ms

with auto-ranging capability. Press the MAX button for 1 second or more to activate or

exit the max feature in the following functions: DCV, ACV & ACA

Relative zero

mode

Relative zero

mode allows the user to offset the meter consecutive measurements

with the displaying reading as the reference value. The display will now show readings

relative to the stored reference value. That is, display = reading - stored value. Press the

button momentarily to activate and to exit relative zero mode.

Auto-ranging

Where there is more than one measuring range under a selected meter function, the

LCD annunciator "a" turns on. The meter will automatically switch to the best resolution

range when making measurements. No manual ranging selection is required.

Auto Power Off (APO)

When the meter is on, the Auto Power Off (APO) feature will switch the meter into a sleep

mode automatically to extend battery life after approximately 30 minutes of the last front

panel activity. To wake up the meter from APO, press the buttons momentarily or set the

slide-switch to the OFF position and then slide back on again. Always set the slide-switch

to the OFF position manually when the meter is not in use.

5) MAINTENANCE

WARNING

To avoid electrical shock, disconnect the meter from any circuit, remove the test leads

from the input jacks and turn OFF the meter before opening the case. Do not operate

with open case.