Follett Edge Series Installatiehandleiding - Pagina 12
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Follett Edge Series. Follett Edge Series 17 pagina's. Laboratory freezer
Ook voor Follett Edge Series: Installatiehandleiding (17 pagina's)
Pagina afdrukken
Troubleshooting
If the unit malfunctions, check the following potential causes before calling for service. In the case of inadequate
refrigeration or freezing, transfer the stored items to another freezer before checking.
Freezer is too warm
Freezer alarm is on
Moisture collects on the outside
Freezer is noisy
There is an odor in the freezer
12
FZRNAT5-SD
Adjust temperature control.
Make sure door is closed properly.
Check if ambient temperature is too high.
Check if door gasket is not damaged or has foreign substances
preventing from closing the door adequately.
On start-up of the unit:
The temperature in the unit does not match the set value on control
panel.
On use:
Check if door has not been left opened for a long period of time.
Frequent door openings in highly humid conditions can cause this.
Reduce door openings and reduce time door is open.
Make sure door seal is tight.
Make sure cabinet is level, not touching a wall or other surface, and
rests squarely on the floor on all four corners.
Normal noises include refrigerant gurgling as it passes through
tubes and the compressor clicking on and off.
Check to ensure the items stored are not causing the odor. Clean
interior.