Amprobe CO2-100 Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Amprobe CO2-100. Amprobe CO2-100 18 pagina's. Co2 meter

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the

operation of the meter, the following steps should be

performed in order to isolate the cause of the problem.

1. Check the battery. Replace the battery

immediately when the "

the LCD.

2. Review the operating instructions for possible

mistakes in operating procedure.

Except for the replacement of the battery, repair of the

meter should be performed only by a Factory Authorized

Service Center or by other qualified instrument service

personnel. The front panel and case can be cleaned with

a mild solution of detergent and water. Apply sparingly

with a soft cloth and allow to dry completely before

using. Do not use aromatic hydrocarbons or chlorinated

solvents for cleaning.

1. The meter is powered by either 4 AA batteries or a

DC adaptor (9V/1A output).

2. When battery voltage gets low, "

will appear on the LCD (Fig.6). And beeper sounds.

The CO2 sensor can't work under low voltage, so it

beeps to indicate failed CO2 measurement and the

readings won't be displayed. Please replace with

fresh batteries or connect with an adaptor.

" symbol appears on

" and "Lob"