Follett FZR5-PL Series Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 7

Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} Follett FZR5-PL Series. Follett FZR5-PL Series 17 pagina's. -30 c undercounter plasma freezer
Ook voor Follett FZR5-PL Series: Installatie-, Bedienings- en Onderhoudshandleiding (20 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (20 pagina's)

Controller security

The controller panel can be locked to prevent inadvertent or intentional programming changes. In locked mode,

the controller will display cabinet temperature and cut-out set point only.

To lock the controller

1. Press the UP/DOWN ARROW in the middle until "POF" displays.

2. Programmer is now locked.

To unlock the controller

1. Press UP/DOWN ARROW in middle until "PON" displays.

2. Programmer is now unlocked.

Controller programming key degrees C (optional accessory)

A controller programming key is available from Follett to provide fast and easy reprogramming of factory settings

(part# 00173542).

Programming key from a freezer (upload)

1. Set the controller to the desired cut-out temperature using the controller key pad.

2. Remove 6 screws from panel holding controller to access back of controller.

3. With controller ON, insert key into 5 PIN receptacle on controller back.

4. Push UP ARROW on controller front ("uPL" displays followed by "end").

5. Press SET ("end" stops fl ashing).

6. TURN OFF freezer and remove key.

7. Turn freezer back on.

8. Programming key is now programmed.

Note: An "Err" message displays for failed programming. Push UP ARROW again to restart upload or remove

key and abort.