DPA 4006 Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DPA 4006. DPA 4006 18 pagina's. Omnidirectional microphones
Ook voor DPA 4006: Gebruikershandleiding (13 pagina's), Gebruikershandleiding (11 pagina's)
Pagina afdrukken
User's Manual
Care Of Microphone
Use of Acoustic Pressure Equalizers
•
Acoustic Pressure Equalizers are only to be used with the standard
silver protection grid DD0251.
•
Do not try to fit APE's on Nose Cone UA0777.
•
The microphone must be inserted into the APE hole from the end which
is opposite to the O-ring. Push the microphone through the hole gently;
apply a small amount of force when the microphone passes the O-ring
and is locked. Never turn the microphone or the APE, since this may
cause a tightening or loosening of the grids. When positioned correctly,
the APE is flush with the diaphragm.
•
Caution: During insertion of the microphone do not place a finger or a
palm across the hole, as air confined in the hole may cause the
diaphragm to crack.
•
When dismounting the APE, use a thumb to press it off. Never turn the
microphone or the APE.
Fig. 14.
Correct mounting and
dismounting of APE's.
1. Correct direction for mounting
and dismounting APE's.
2. The APE must be positioned so
that it is flush with the diaphragm.
3. To avoid separation of the
microphone or tightening of the
grid, do not turn the microphone.
15