Amprobe TMD Series Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Amprobe TMD Series. Amprobe TMD Series 11 pagina's. Software and usb/wireless driver
Pagina afdrukken
6.5
To export data stored in meter to PC.
Only available for meters with save/data
log function.
Click this icon to bring up "Data
download dialog box".
File menu
File
Exports Data exports
Exit
Exit program.
Reload re-load data.
6.6
Received signal strength indication.
Only available for meters with wireless
function.
I. The barograph and number are Received
Signal Strength Indicator (RSSI).
RSSI >= 60 signal is better (in green
range).
60 <= RSSI <=50 signal is good (in
yellow range).
RSSI <= 50 signal is weak. (in red
range)
II. Suggestions for weak signal:
Change the location & orientation of
doungle (vertical to the ground is
best.)
Change location of orientation of me-
ter.
6.7
Low battery warning,, please change
batteries as soon as possible.
7. INTRODUCTION OF MAIN DISPLAY
Left hand side shows reading of each channel
with unit at right-upper corner.
When measure with thermocouple, the type of
thermocouple is shown at left-upper corner.
Right hand side shows maximum (MAX), min-
imum (MIN), range (MAX-MIN) and average
(AVG) value of readings, and times of maximum
and minimum value occur.
Click the button to holds the current reading.
Click the button to reset the reading and time of
MAX, MIN&AVG.
Click the button to activate out of limit alarm.
Hi/Lo limit values are set in 6.
8. USER LINEAR OPERATION
Click this button to create a new blank file
based on the default template.
Click this button to open project.
Click this button to open or find a file.
Click this button to save the active file
with its current fine name, location and
file format.
Click this button to edit data.
Click this button to add data.
Click this button to delete data.
Click this button to calculate this polyno-
mial.
Data complete
Download user linear to meter