DPE Medical DST 8000 Uitpakken en montage-instructies

Blader online of download pdf Uitpakken en montage-instructies voor {categorie_naam} DPE Medical DST 8000. DPE Medical DST 8000 19 pagina's.
Ook voor DPE Medical DST 8000: Gebruikershandleiding (12 pagina's), Uitpakken en montage-instructies (14 pagina's)

Pagina afdrukken

DST8000 Triple/Pro

Important: a. It is essential to read a few times all instructions before beginning.

b. If something is not clear or if you are uncertain how to proceed,

stop and contact support at:

C. pictures can vary, depending on your model

1. Each package has a drawing attached to it. Remove the pat from the package

only when needed for assembly

2. During assembly you will connect two low current electrical sockets/outlets, like this:

(Applicable to computerized model

3. Each part has its bolts and nuts for assembly in its package. You will find some extra

nuts and bolts packed with a note: "Spare".

4. Start by removing the top of the crate. It will be used as a ramp to roll off the main

part from the crate's floor.

5. Remove this wall first and take out part # 11. Put it aside. This part weight 33 kg.

(70 lbs.)

Note:

Two people needed to take out this parts

part # 11

Unpacking and Assembly Instructions

[email protected]

only)

-1-