COMECO TI08-R Bedieningshandleiding - Pagina 6
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} COMECO TI08-R. COMECO TI08-R 13 pagina's. Process indicator (trip alarm unit)
Pagina afdrukken
Parameter Programming
Some parameters
are accessible only
when the respective
functionality is installed.
(see 'Specifications').
- Changing
Point Position value
reflects on the real value
of all parameters
with ISU!
E.g.: changing
Point Position value
from (0) to (0.0)
would change
a set-point value
of 100 to 10.0!!!
Device parameters
TI08 is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
Setting numerical parameter value
♦
Enter parameter value adjustment mode
(see 'Program Levels').
♦
The whole part of the value together with
the left zeroes appears on the display,
and the rightmost digit blinks.
♦
To select another digit, press
♦
The 3 rightmost digits can accept values
from 0 to 9, and the leftmost digit
can also accept the values - and `.
♦
To increase or decrease the blinking digit
value, use respectively
♦
Confirm the adjusted value by pressing
simultaneously
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting symbolic parameter value
♦
Enter parameter value adjustment mode
(see 'Program Levels').
♦
Read the blinking parameter value.
♦
To change the value, use
and to confirm, press
+
or
.
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
.
or
.
+
+
or
or
+
6
.
,