Ampt Analoger ADG-1 SE Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ampt Analoger ADG-1 SE. Ampt Analoger ADG-1 SE 12 pagina's.

Functional Specifications:

Note: All specifications subject to change at the whim of our overloads.

Time, Feedback, Rate and Amount control range all extended with the

use of Expression Pedal or control voltage input.

Delay Time: 50ms – 1060ms Bucket switch down (all BBDs),

•

17ms – 350ms with switch up. 13ms – 1350ms with LFO or

Control Voltages. CV is log V/Octave input.

Feedback: 0 to greater than infinite. Capable of self-oscillation.

•

Rate: LFO RATE, from 0.08Hz to 40Hz (75Hz with CV control)

•

Amount: LFO depth control from OFF to 56% of TIME sweep.

•

Drive: up to +23dB of control or level matching.

•

Mix: Center 50%. Adjust from near 100% wet to -44dB dry

•

Tone: ~605Hz center tilt like filter. Center = Flat to 0.25dB

•

High +5dB to -12dB, Low +4dB to -7dB.

Bucket Toggle: 1 or 3 BBDs (4096 or 12288 buckets)

•

LFO toggle: Rounded triangle, slewed square wave, or OFF

•

Bypass Footswitch: effect on/off user selectable True Bypass or

•

JFET Buffered

Tails/Mod Footswitch: User selectable modulation kill or engage

•

tails bypass (sometimes called Spillover).

Expression Switch: 4 position rotary selects Time, Feedback,

•

Rate or Amount controlled by expression pedal. Time is bi-polar

and log input modulation (0V=-50%, 5V=+50%) all others are

additive and linear control.

Under the hood switches:

True Bypass / Buffered bypass: Selects between true bypass and

•

classic JFET buffered bypass

2nd Stomp Switch function: Selects if 2

•

enables/disables modulation or is Tails mode.

(Accessible by removing ADG-1 Cover)

<6>

stomp switch