Amptek AMETEK Mini-X2 Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Amptek AMETEK Mini-X2. Amptek AMETEK Mini-X2 4 pagina's.
Pagina afdrukken
9. Click the HV ON button to turn on the tube. The software will ask you to confirm. Click Yes.
10. The Mini-X2 will start to beep and the red LED on the end panel of the unit will flash. In addition
the yellow and black "Radiation Symbol" will blink in the Mini-X Software and the words "X-Ray
ON" will appear. Note: The LED indicates changes color and flashing to indicate system status, as
described in section Error! Reference source not found..
11. The Voltage and Current monitors now show the actual X-ray tube condition. Although the values
for Voltage and Current might be slightly different from the requested values, these are the actual
values of the tube.
12. To change the high voltage and current, click into the appropriate text box and enter the number.
Then click the Set High Voltage and Current button.
13. To turn off the Mini-X2 click the HV OFF button, then click the Exit button to exit the software.
Always unplug the Mini-X-2, install the safety plug, and disable the interlock when not in use.
Mini-X2 User Manual Rev A0
THE MINI-X2 IS NOW PRODUCING X-RAYS
LED
Indicator
Page 3 of 4