Amptek PC5 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Amptek PC5. Amptek PC5 13 pagina's.



Preamp power set to +/‐ 5 V (R16 = open, R18 = 0 Ohm/short).



VR1 and additional components installed for HV control (installed at the factory).



VR3 and additional components installed for temperature control (installed at factory).



J5 installed and connected to PA preamp with flex cable.



J7 installed. Unlike the XR100 that has a separate signal out, the PA preamps send the

signal through the power flex cable. As a result, the signal must be taken from the PC5 J7

connector and then connected to the user supplied signal processor.



Input power is applied either to J1 with the AC adapter or to J4 from a power supply.

Your

Products for

Imagination