AMQ ACTIV Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AMQ ACTIV. AMQ ACTIV 13 pagina's. Height adjustable sit-to-stand benching
Ook voor AMQ ACTIV: Installatiehandleiding (17 pagina's), Montagehandleiding (16 pagina's), Handleiding voor gebruikers en probleemoplossing (12 pagina's)

Handset Lock

1. Press and hold the "M" button (about 5 seconds) until the LED display shows "LOC".

2. Release the button. The handset is now locked and no buttons will work.

Handset Unlock

1. Press and hold the "M" button (about 5 seconds) until the LED display switches from "LOC"

to the height number.

2. Release the button. The handset is now unlocked and fully functional.

Choosing one-touch or constant-touch for memory preset buttons

ACTIV allows you to choose either one-touch (press and release) or constant-touch (hold until desired height

is reached, allowing you to release early if a different height is preferred) for controlling your memory presets.

Press the DOWN button on the Handset until the base reaches its lowest position. Release.

Press and hold the DOWN button again until the LED display reads "ASR".

Press and hold the "1" button until it switches to either:

10.1 = One-Touch

10.2 = Constant-Touch

"ASR" will show on the display.

Finish the reset process by pressing and holding the DOWN button until the desk lowers a little bit more,

slightly rises and stops. Release the button. The new setting is saved and your desk is now ready to use.

Setting the LED Retracted Height

Press the DOWN button on the Handset until the base reaches its lowest position. Measure the distance

from floor to the top surface of the desktop. If the number on the LED display does NOT match your

measurement, follow these steps:

1. Press and hold the DOWN button until the LED display reads "ASR". Press and hold the "M" button

(about 5 seconds) until the LED displays the flashing height. (If the display returns to "ASR" before the

next step is taken, repeat this step.) Use the UP/DOWN buttons to change the value of the starting

height so that it matches your measurement. Wait about 5 seconds and the display will return to "ASR."

2. Finish the reset process by pressing and holding the DOWN button again until the desk lowers a little bit

more, slightly rises and stops. Release the button. The new starting height value is saved and your desk

is now ready to use.

Note:

LED display has a + 0.1 tolerance.

Setting a Custom Maximum Height

1. Use the UP button to move the base to the desired maximum-height position.

2. Press the "M" button and release. The LED display will show "S- ''.

3. Then press the "UP" button and release. The LED display will show "999". The new maximum height is

now set.

ACTIV USER GUIDE | 2

amqsolutions.com