AMQ ACTIV-Pro Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AMQ ACTIV-Pro. AMQ ACTIV-Pro 7 pagina's. Sit-to-stand table
Ook voor AMQ ACTIV-Pro: Installatiehandleiding (12 pagina's), Montagehandleiding (16 pagina's), Handleiding voor gebruikers en probleemoplossing (12 pagina's)
Pagina afdrukken
The table always stops at the same position, before reaching maximum height
Evaluation
Has the system been programmed to this specific
height?
Is the table at its highest position?
The table could be overloaded.
Not all columns run when you run the table downwards
Evaluation
The column that does not run could be defective or
the cable connection for the column is not ok.
If your issue persists, please contact AMQ Customer Care
at [email protected] or (877) 801-0370.
915 Walsh Avenue / Santa Clara, CA 95050 (877) 801-0370 amqsolutions.com
troubleshootingGUIDE
Solution
Perform resetting.
When the table has reached the maximum height, it
can only run downwards.
Remove some of the load and perform again.
Solution
Check all connections, then perform resetting.
If a column will not run upwards after resetting,
it is defective; contact us for a warranty kit.
ACTIV-Pro sit-to-stand table