AMS AS5262 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AMS AS5262. AMS AS5262 11 pagina's. Adapterboard, 12 bit magnetic angle position sensor with 2 outputs
Ook voor AMS AS5262: Handleiding voor programmering (14 pagina's)

Pagina afdrukken
AMS AS5262 Gebruikershandleiding
AS5261/ AS5262 Adapterboard User manual

2. Package and Board Description

Adapterboard Kit Contents
The demo kit includes following items listed below in
Table 1:
Adapter Kit Contents
Pos
Item
1
AS5261 or AS5262 Adapterboard
2
Diametrial Magnets
Board Description
The AS5261 / AS5262 adapter board is a simple circuit allowing test and evaluation the rotary
encoder quickly without building a test fixture or PCB. The PCB requires a 4-wire connection: 5V
power supply, GND and two output connection . If there is the need to use full redundancy ( 6-
wire connection), a different PCB is required. Pin 1, 3, 5, of JP1 are the Top Die Connection.
Pin 2,4 and 6 of JP1 are the bottom die connection.Capacitor C1 and C2 (both 1uF) are
buffering the LDO output VDD3 of the top-die and the bottom-die; C3 (1uF) is placed between
VDD and GND.
Resistor R1,R2,R3 and R4 as well as the capacitor C5,C6,C7 and C8 are optional, for using
different filter options during the Evaluation phase..
Figure 2
Adapterboard front view
C
www.ams.com
Table
A
B
D
Revision 1.0 / 10/31/12
1.
Comment
Board + AS5261 or AS5262
(A) JP1 Connector
( GND,VCC,OUT)
(B) AS5261 / AS5262 sensor
(C) 4 x 2.6 mm mounting
holes
(D) Marking for AS5261 or
AS5262 AB Board
page 3/10