amsbio Ozilla AMS.E4002GD Snelstarthandleiding - Pagina 6
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} amsbio Ozilla AMS.E4002GD. amsbio Ozilla AMS.E4002GD 6 pagina's.
E. STORED DATA REVIEW: To enter this mode, press the down button to highlight the "History data" option, then press the [OK] button.
The following screens are displayed as follows:
History data
•
Data Control
•
Clear Hisdata
First "History data" screen
NOTES: To store an ozone data reading, press the up button for 3 seconds. An audible beep will sound and the red alarm light will
come on briefly. The stored data will have a time (second "History data" screen) and date (fourth "History data" screen) stamps as
seen in the examples above.
FACTORY RESET: To enter this mode from the MAIN MENU screen, press the down button to highlight the "Reset factory" option,
F.
then press the [OK] button. The following screen is displayed:
Reset factory
Confirm reset factory?
CANCEL
Confirm
If a reset to factory specifications is desired, use the up or down button to highlight the "Confirm" option then press the [OK] button. All
values, except the high and low alarm values set by the user, will revert to factory settings. After the factory reset, the detector will
default back to the MAIN MENU screen.
LIMITED LICENSE: The purchase price paid for the Ozilla® Ozone Gas Detector Pro grants end users a non- transferable, non- exclusive license to use the
instrument in a research laboratory setting, and for the intended purposes only as described in this manual. This use license excludes and without
limitation, resale, repackaging, or modification of the instrument in any way and without prior notification of and approval by Genlantis.
Purchasers may refuse this license by returning the Ozilla Sterilizing unit unused and its original packaging. By keeping or using the Ozilla unit, users agree to
be bound by the terms of this license. The laws of the State of California shall govern the interpretation and enforcement of the terms of this license.
Ozilla® Ozone Gas Detector Pro
Segment
1703160939
Press [OK] once
Second "History data" screen
Sensor O3
Time
Data
13:34:55
0.10
1/1 page
Fourth "History data" screen
Number
Check
1
Press [OK] once;
highlighted "Check"
will
1/1 page
press [OK] again to
move
screen
Unit
PPM
Sensor
O3
Press [OK] once
blink,
then
to
third
History data
Number
Check
1
Check
Third "History data" screen