DR. Heater DR-233 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DR. Heater DR-233. DR. Heater DR-233 10 pagina's. Carbon infrared heater indoor/outdoor
Pagina afdrukken
Remote Control Instructions
1. POWER BUTTON: Turn the heater off.
2. UP BUTTON: Increase timer and level.
3. DOWN BUTTON: Decrease timer and level.
4. LEVEL BUTTON: Use to adjust the heat levels(L1-L2). Press the Level button then use the up and
down buttons (buttons 2 and 3) to increase or decrease the heating level.
TIMER BUTTON: To set the timer from 0H-9H, which is the number of hours it will run. 0H will
5.
display and then adjust to the number of hours you would like to set, using the up and down
buttons (2 and 3).
Noted: All heaters and their remote controls have the same frequency, so it is possible to control
several heaters with just one remote.
PUSH BUTTON: on the right end of heater, it could be manual operated without remote control.
Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery cover. Insert the batteries in
accordance with the instructions and polarity the batteries.
2. Change the batteries in the same way depicted above.
NOTICE:
1. Replace the old batteries with the same type batteries. Otherwise, your heater may not
function well.
2. Pull out the batteries in case of long terms of disuse to prevent leakage which may impair your
remote control.
3. Do not allow water or liquid to get into the remote control.
Caution:
When the appliance is not operated for a long period of time, cleaning or maintenance is conducted
or when the location of the heater is changed, the heater should be turned to OFF and unplugged
from the electrical connection.
Periodic inspection and removal of dirt and contaminants will ensure that equipment can be
operated safely.