Electrolux # Gebruiks- en onderhoudshandleiding - Pagina 28

General Care

Cleaning

CLEANINGCOOKTO BURNERGRATES,BURNER

CAPSAND BURNERHEADS

[]

Burner

Caps

Should you ever need to remove the burner caps for cleaning lift the burner cap off the

burner head. Clean heavy soils with an absorbent cloth. Rinse with a clean, damp cloth

and immediately thoroughly

dry including the bottom and inside of the cap. Do not use

harsh abrasive cleaners. They can scratch the porcelain on the cap. Do not clean burner

caps in dishwasher.

When placing the burner caps, see Important note below.

Double ring burner

cap

The glass in the double ring is designed to fit loosely. Clean with normal non abrasive glass

type cleaner and thoroughly dry before replacing.

Burner

heads

Lift the burner cap from the burner head. The surface burner heads are secured to the

cooktop and must be cleaned

in place.

For proper gas flow it may be necessary to clean the burner heads and slots. To clean, first

use a clean DAMP cloth to soak up any spills. Remove any food from between the burner

slots using a small nonabrasive brush like a toothbrush and afterwards wipe using a damp

cloth. For stubborn soils located in the slots, use a small-gauge wire or needle to clean.

Should you experience ignition problems it may be that an ignition port hole is partially

blocked with soil (see figs 1 & 2). With the burner head in place, use a small wire gauge

needle or the end of a paper clip to clear the ignition port or ports.

Ignition port

Figure 1 - Cooktop burner head

(All burners except Double ring burner)

Ori

Figure 2 - Double ring burner head

(Models equipped with double ring burner only)