Advanced Brain Technologies Waves Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Advanced Brain Technologies Waves. Advanced Brain Technologies Waves 3 pagina's. Optimized for the listening program
Pagina afdrukkenWaves Amplifier Charging Instructions
Fully charge the batteries before first use. Charge the amplifier from a computer
USB port or AC adapter. Allow 3‐4 hours to charge. Batteries provide over 15
hours of use on a single charge.
LED Battery Status Indicator
Low battery =
flashing red LED
Adjusting Volume
The amplifier allows you to adjust
air conduction (AC) volume, which
is what you hear through the ear
cups, and bone conduction (BC)
volume, the amount of vibration
coming through the bone
conductor.
Always make sure the volume on
your device is set to the maximum
volume to ensure adequate power
is going to the amplifier. Volume levels for AC and BC are preset on the amplifier
at 5 on a loudness scale of 0‐10, with 0 being silent and 10 maximum volume.
When you power your amplifier on, you will see AC and BC on the Main menu. To
select the AC or BC menu, highlight the desired menu using the arrow keys and
press select. Then adjust volume to desired setting and return to the Main menu.
The amplifier will save your settings until you change them.
If you need to make volume adjustments for more comfortable listening, adjust
the AC volume on the amplifier for desired comfort level. Do not adjust for
comfort on your listening device, as this will reduce the power needed for bone
conduction. Do not change the channel balance or BC volume unless instructed by
your provider.
Waves™ is optimized for The Listening Program® by Advanced Brain Technologies
Charging =
flashing green LED
Full charge =
steady green LED