AIRSLED Sub-Zero Series Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AIRSLED Sub-Zero Series. AIRSLED Sub-Zero Series 3 pagina's.

USING AIRSLEDS SUB-ZERO

Airsled's Sub-Zero

adapters are designed to ensure that the air beams safely lift a Sub-Zero

by the appropriate, structural contact points. Follow the below procedure when using this accessory:

•

Prepare the work environment by ensuing objects on, inside or near the refrigerator are removed

and/or secured.

•

Remove any bendable or breakable features at the base such as front grill cover and drip pan.

•

Confirm that there are no other breakable components hanging down that could prevent the adapters

from making contact at the desired points of the refrigerator's base.

•

Slide the Airsled air beams under the refrigerator.

•

Remove the rear metal pins and wood block and place the metal rails sideways on the air beams and

then rotate so they are both are upright. See figure 1. This is done before sliding on the wood block

supports.

•

With the rails upright, slide the wooden blocks into the desired slot. There are two slots. One is for a 3

¼" height and the other is for a 3 ½" height. Select your desired slot. See figure 2.

•

Insert the rear pins back into the rails. See figure 3.

•

Ideally, the gap between the adapters and the refrigerator's base will be uniform. This will minimize

possible tilting during load movement. The adapters' front supports may need to be adjusted to

correct any variance between the front and rear gap. See figure 4.

Figure 1 (top view)

Figure 3

ADAPTERS

70 – A Aleph Dr.

Newark, DE 19702

Page 1 of 2

refrigerator

Figure 2

Figure 4 (adjustable front

support)

Support Email:

Toll Free Number: 1-800-AIRSLED (1-800-247-7553)