Electrolux 925060324 Diagnostische procedures - Pagina 12
Blader online of download pdf Diagnostische procedures voor {categorie_naam} Electrolux 925060324. Electrolux 925060324 14 pagina's.
Pagina afdrukken
Display
Function
code
Test
Freezer
39
Evaporator
Defrost
Sensor
45
Icemaker
Tray Sensor
Icemaker
68
Evaporator
Defrost
Sensor
Humidity
64
Sensor
At the end of all the Function Tests, one section is dedicated to the visualization of the ID-string or
software version of all the electronic boards that are present in the appliance.
When the last item of Test Functions is visualized, pressing again the + button to progress, it will
start automatically to display "--" on the display and after this it will start the sequence described
below.
Between 2 items (i.e Software Parameters and Main Board Firmware Version) it will be displayed
again a "--" character, used as separator.
a-
Software
Parameters
b-
Main Board
Firmware
Version
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
Action Available
Activates
Automatically
Activates
Automatically
Activates
Automatically
Activates
Automatically
Runs Automatically,
scrolling all the digits
of the string.
Runs Automatically,
scrolling all the digits
of the string.
ARESI1006
Behavior Expected
a. On the Display it shows temperature
sensed by Freezer Evaporator
Defrost Sensor.
b. It is displayed in °C or °F according to
UI selection of the temperature
representation.
c. "OP" if open-circuit; "SH" if short-
circuit.
a. On the Display it shows temperature
sensed by IceMaker Tray Sensor.
b. It is displayed in °C or °F according to
UI selection of the temperature
representation.
c. "OP" if open-circuit; "SH" if short-
circuit.
a. On the Display it shows temperature
sensed by IceMaker Evaporator
Defrost Sensor.
b. It is displayed in °C or °F according to
UI selection of the temperature
representation.
c. "OP" if open-circuit; "SH" if short-
circuit.
a. On the Display it shows relative
Humidity sensed by H&T sensor in %.
b.
"OP" if open-circuit; "SH" if short-
circuit.
a. Displays digits sequence related to the
set of parameters that is flashed inside
erf2600 power board;
b. It is built of 8 digits.
c. For Example: "00499539"
d. Press + button if you want to skip this
visualization and pass to the next
record.
a. Displays digits sequence related to the
ID string or firmware version of erf2600
power board
b. It is built of 8 digits
c. For Example: "JHB10G10"