Electrolux 925060324 Diagnostische procedures - Pagina 5
Blader online of download pdf Diagnostische procedures voor {categorie_naam} Electrolux 925060324. Electrolux 925060324 14 pagina's.
Pagina afdrukken
6. A tone will plat to confirm, when enter you are in the Diagnostic mode
7. To EXIT from diagnostic mode, press and hold + and – buttons for 10 seconds. The
appliance will restart in normal mode.
List of Functions in the Diagnostic mode:
Displayed
Function
code
Test
-
First Screen
-
Second
Screen
Freezer
2
Defrost
Heater
Main Valve
8
Cube/Crush
11
Solenoid
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
Display
Action
Available
-
-
Press (MODES) to
change the status
of the Function
Press (MODES) to
change the status
of the Function
Press (MODES) to
change the status
of the Function
ARESI1006
Behavior Expected
a. Turn On all LED's into Display of
Ruby UI, External Cobalt UI I&W and
Indigo UI.
a. Turn Off all LED's into Display of
Ruby UI, External Cobalt UI I&W and
Indigo UI.
a. Heater on when "on", off when "oF".
b. Freezer Evaporator Defrost Sensor
temperature is flashed on the display.
c. Watch for temperature increase with
the heater on.
d. It may take a few minutes for the
evaporator to heat up. Maximum 5
minutes ON or 45°C Freezer Evap
Defrost Sensor threshold.
e. Press (MODES) button to change the
status
a. Main valve (faucet) is activated when
"on"; stops when "oF"
b. Press (MODES) button to change the
status
a. Do not leave solenoid activated for
more than 1 minute. It is forced
automatically to off after 1 minutes of
continuous on.
b. Solenoid activated when "on",
deactivated when "oF".
c. Press (MODES) button to change the
status