Electrolux Built-In Dishwasher Gebruiks- en onderhoudshandleiding - Pagina 27

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Electrolux Built-In Dishwasher. Electrolux Built-In Dishwasher 44 pagina's. Built-in oven
Ook voor Electrolux Built-In Dishwasher: Gebruiks- en onderhoudshandleiding (36 pagina's), Handleiding voor installatie-instructies (28 pagina's), Gebruiks- en onderhoudshandleiding (28 pagina's), Gebruiks- en onderhoudshandleiding (40 pagina's), Gebruiks- en onderhoudshandleiding (27 pagina's), Gebruiks- en onderhoudshandleiding (12 pagina's), Gebruiks- en onderhoudshandleiding (22 pagina's), Tips en Recepten (36 pagina's), Gebruiksaanwijzing (18 pagina's), Gebruiksaanwijzing (21 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruikershandleiding (29 pagina's), Gebruikershandleiding (27 pagina's), Instructieboek (17 pagina's), Instructieboek (15 pagina's), Instructieboek (18 pagina's), Instructieboek (27 pagina's), Instructieboek (18 pagina's), Servicehandleiding (50 pagina's)

Pagina afdrukken

Electrolux Built-In Dishwasher Gebruiks- en onderhoudshandleiding

TEMPERATURE PROBE

For many foods, especially roasts and poultry, testing the internal temperature is the best method

to insure properly cooked food. The Temperature Probe gets the exact temperature you desire

without having to guess. This feature can be used with Bake, Convection Bake and Convection Roast

cooking modes. The oven can be programmed for Probe at any temperature between 130°F to 210°F

with a default temperature of 170°F.

IMPORTANT:

1. Use only the probe supplied with your appliance; any other may result in damage to the probe

or the appliance.

2. Handle the Temperature Probe carefully when inserting and removing it from the food and outlet.

3. Do not use tongs to pull the cable when inserting or removing the Probe. It could damage the Probe.

4. Defrost your food completely before inserting the Probe to avoid breaking it.

5. Never leave or store the Temperature Probe inside the oven when not in use.

6. To prevent the possibility of burns, carefully unplug the Temperature Probe using hot pads.

Proper Temperature Probe Placement:

1. Always insert the probe so that the tip rests in the center of the

thickest part of the meat. Do not allow probe to touch bone, fat,

gristle or pan.

2. For bone-in ham or lamb, insert the Probe into the center of the

lowest large muscle or joint. For dishes such as meat loaf or

casseroles, insert the Probe into the center of the food. When

cooking fish, insert the Probe from just above the gill into the

meatiest area, parallel to the backbone.

3. For whole poultry (chicken, turkey, etc.), insert the probe into the thickest part of the inner thigh

from below and parallel to the leg (see figure 1).

Setting the Oven when using the Temperature Probe:

1. Insert the Temperature Probe into the food (see Proper Temperature Probe Placement above).

2. Plug the Temperature Probe into its outlet in the oven. (The outlet is located on the top left hand

side of the cavity wall, near front of the oven). Always insert the probe into a cool oven. Make

sure it is pushed all the way into the outlet. Close the oven door.

3. Press OVEN

to light up the available cooking modes pads.

OVEN

4. Select a cooking mode. A target temperature must be set to trigger the buzzer when the food

reaches the set temperature. Press COOK OPTIONS

and press PROBE

pad to enter the temperature. Adjust temperature to the desired setting

using the numeric pads or just press START

The pads

can also be pressed to raise or lower the temperature. The target temperature

setting will be accepted after the START

5. At any time during the cooking, the PROBE

meat temperature or pressed twice to display the target temperature. When on the target

temperature display, a new temperature can be entered. After 5-8 seconds, the display will go

back to showing the oven temperature.

6. When the food reach the target temperature, the oven will go into a WARM OVEN mode until

you press CANCEL

The probe can be damaged by very high temperature. To protect the probe against this

damage, the oven control will not allow you to start a self-clean, broil or convection broil while

the probe is connected.

Cooking Modes

to use the default target temperature of 170°F.

pad is pressed.

pad can be pressed once to display the actual

Figure 1

to bring up the cook options items

Model B