Bosch Ascenta SHE3AR76UC Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Bosch Ascenta SHE3AR76UC. Bosch Ascenta SHE3AR76UC 7 pagina's. Bosch ascenta she3arl2uc: install guide
Ook voor Bosch Ascenta SHE3AR76UC: Gebruiksaanwijzing (23 pagina's), Gebruiksaanwijzing (40 pagina's), Snelstart- en veiligheidshandleiding (12 pagina's)
![Bosch Ascenta SHE3AR76UC Snelstarthandleiding](/uploads/products/server2/1327510/1327510.jpg)
ADD RINSE AID
This dishwasher is designed to be used
with rinse aid, which enhances drying
results and shine .
Tip: Remove lid of the bottle for easier
pouring and avoid the air vent .
The amount of rinse aid dispensed can be
adjusted in the settings . Only change the
setting if streaks remain on the dishes (lower the amount), or if dishes are not
getting dry enough (increase the amount) .
Setting
Factory setting Description
d-Intensive drying
d:00/ off
d:00-d:01
r-Rinse Aid
r:05
r:00-r:06
P-Auto power off
P:00/ unit does
P:00-P:02
not shut off
automatically
rE-Factory reset
rE
ADJUSTING THE SETTINGS
1. Press the On/Off button . Hold down the selection buttons > and
START until the display shows
2. Release both buttons . Press the selection button > until the display
indicates the desired selection .
3. Press button < to choose the desired setting for that selection .
4. Press Start button to save the setting .
8
max
air
vent
Improved drying for glasses and
plastic, by increasing the tempera-
ture and length .
Dispenses the amount of rinse aid,
which affects drying (see above) .
Unit turns itself off after cycle is
complete, either after 1 minute, P:01
or after 2 hours, P:02 .
Restores the factory settings on the
dishwasher .
x (x can be any number) .
E:
MAINTENANCE TIPS
Clean surfaces with damp cloth and mild soap .
NOTICE: Do not use abrasives or bleach based cleaners . Do not use stainless
steel cleaner on black stainless or anti-finger print surfaces .
Clean the filter 3-12 times a year, depending on usage .
1.
Unscrew the Large Object Trap as illustrated and remove the entire filter
system .
2.
Remove the micro-filter from the fine filter, rinse the filters under running
water clean with a soft brush .
3.
Reinstall the filter system in reverse sequence, align arrows .
2
1
FREQUENTLY ASKED QUESTIONS
Q
:
Why is food left on dishes?
A
:
It is possible the dishes do not have adequate clearance between them .
Also, be sure nothing is blocking spray arm and that the filter is clean . Select an
intensive cleaning cycle .
Q
:
Why does the cycle run a long time?
A
:
1 . Sensors in the dishwasher automatically increase the cycle time to ensure a
good wash when heavy soil is detected .
2 . Incoming water may not be hot enough and dishwasher has to heat it .
Q
:
Why is E:XX (X can be any number) displayed?
A
:
This is an error code . For example, E:22 indicates there is water in the sump
because the filter is blocked or needs cleaning . See the Use and Care Manual
for a list of error codes .
To access the full Use and Care Manual visit:
www.bosch-home.com/us/service/get-support/owner-manuals.
Type in the Model Number which can be found inside the dishwasher door:
9