Bosch Ascenta SHE5AM02UC Instructies voor reparatie - Pagina 30

Blader online of download pdf Instructies voor reparatie voor {categorie_naam} Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 pagina's. Quick reference instructions
Ook voor Bosch Ascenta SHE5AM02UC: Handleiding voor installatie-instructies (21 pagina's), Energie Handleiding (2 pagina's), Aan de slag (2 pagina's), Reparatie-instructie (27 pagina's)

CONNECTION HINTS:

 Water connection 3/8" NPT female. Inlet water pressure

range 5 - 120 psi (0.3 – 8.27 bars).

 When reconnecting the water supply to the water valve,

don't overtighten the elbow fitting.

 Using Teflon tape on water fittings can help prevent

leaking.

5.6

Drain pumps

Tools needed: T20 Torx & #2 Phillips screwdrivers and pliers.

1. Remove outer door – section 5.1.2.1.

2. Remove toe kick – section 5.1.4.1.

3. Remove base insulation (on models with insulation).

4. Turn off water and disconnect water line (below left).

5. Turn off electricity and disconnect electric supply by

unplugging power cord or disconnecting wire harness /

loosening strain relief (below center & right).

702_58300000130262_ara_en_c

6. Remove the drain pump by rotating it clockwise and pulling

it out (below left).

7. Disconnect wire harness from drain pump (below center).

5.7

Water inlet & condensation tube

The water inlet and condensation tube are easily accessed from

the left side of the dishwasher.

condensation tube connect to the same assembly.

Tools needed: T20 Torx & #2 Phillips screwdrivers and pliers.

1. Remove toe kick – section 5.1.4.1.

2. Disconnect & pull out dishwasher – section 5.1.4.2.

3. Remove lower rack (below left).

4. Unscrew condensation tube cap ccw (counterclockwise)

from inside of tank (below right).

The water inlet hose and

Page 30 of 50