Bosch GI 406-160 Gebruiksaanwijzing - Pagina 19

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Bosch GI 406-160. Bosch GI 406-160 33 pagina's. Bosch appliances dishwasher user manual

Pagina afdrukken

Switching the dishwasher OFF

Several minutes after the programme has

ended:

Open the door when the programme

has ended.

Set main switch

Turn the water tap off.

(Does not apply when Aqua-Stop unit

has been fitted)

Remove dishes, etc. when they have

cooled down.

Interrupting the programme

Open the door. Caution! There is a risk

of water squirting out from inside the

appliance. Do not open the door fully

until the spray arm has stopped

rotating.

Set main switch

Indicator lights extinguish. The

programme is retained in the dish-

washer memory.

If the hot water was switched ON or the

appliance has already heated up and

then the appliance door opened, leave

the door ajar for several minutes and

then close.

Otherwise, the appliance door may fly

open due to expansion.

In order to continue with the stored

programme, set the main switch to ON

again and close the door.

to OFF.

Time delay *

on applicable models

You can delay the start of the programme

in 1-hour steps up to 19 hours.

Switch on the appliance.

Press the timer programming button

until the digital display

Keep pressing the timer programming

button until the required time is

displayed.

To delete the timer programming,

keep pressing the button until

is displayed.

You can change your programme

selection at any time until the

programme starts.

Remaining running time display

When the appliance has started, the

expected programme running time is

displayed. The programmed running time

is affected by the water temperature, the

number of dishes, as well as the degree

of soiling. If these conditions are changed,

the running time (depending on the

selected programme) can vary greatly.

As the effect is not detected until a

programme is running, the time may

be longer or shorter than expected.

Intensive drying

If the "Intensive drying" function is

activated, the temperature of the final rinse

is increased in all programmes and you

will therefore receive an improved drying

result. (Note the higher temperature may

not be suitable for fragile utensils.)

Hold down the programme button A

and switch on the main switch.

Release both buttons.

The digital display

(off).

To change the setting, press the

programme button A .

Switch off the main switch

the setting is stored.

jumps

flashes

(on)

;