Bosch SGE63E06UC/48 Handleiding voor installatie-instructies - Pagina 7

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Bosch SGE63E06UC/48. Bosch SGE63E06UC/48 37 pagina's.

Pagina afdrukken

Electrical

Preparation

Avoid Electrical

Shock Hazard

Do not work on an energized

circuit.

Doing

could

result

in serious

injury

or death.

Only

qualified

electricians

should

perform

electrical

work. Do not attempt any work on the dishwasher

electric

supply

circuit

until you are certain

the

circuit

is de=energized.

Avoid Fire Hazard

Make sure electrical

work is properly installed.

Only qualified

electricians should perform

electrical work.

Electrical

Supply

The customer has the responsibility

of ensuring that the

dishwasher

electrical installation

is in compliance with all

national

and local electrical

codes and ordinances.

The

dishwasher

is designed for an electrical

supply of 120V,

60 Hz, AC, connected to a dishwasher-dedicated,

properly

grounded electrical circuit with a fuse or breaker rated for 15

amps. Electrical supply conductors shall be a minimum #14

AWG copper wire rated at 75°C (167°F) or higher.

Avoid Fire Hazard

Make sure there are no loose electrical connections.

Make sure all electrical

connections

are properly

made.

Grounding

Instructions

The dishwasher

must

be properly

grounded

before

operating.

This

appliance

must

be connected

a grounded

metal

permanent

wiring

system,

or an

equipment grounding conductor must be run with the circuit

conductors

and connected

to the equipment

grounding

terminal or lead on the dishwasher.

Make sure that the

dishwasher is connected to a suitable ground in compliance

with all local codes or, in the absence of a local code, with

the NATIONAL ELECTRICAL CODE in the United States or

the CANADIAN

ELECTRIC CODE C22.1-1atest edition in

Canada as well as any provincial/state or municipal or local

codes that apply.

Dishwasher

Electrical

Rating

Volts

Hertz

Amperes

Watts

120

1,300

(max)

Electrical

Connection

The dishwasher

electrical

supply junction

box (P) and

dedicated

receptacle

must be mounted in an accessible

cabinet adjacent to the dishwasher (do not mount the junction

box or receptacle behind the dishwasher). You will need a

43/4 " x 23/8 " (120 x 60mm) opening through the cabinet in

order to pass the junction box through (see Figure 6). If the

opening is made through wood, sand it smooth. If the opening

is made through metal, use the included protective grommet

(I) or other approved method to protect wiring from damage.

Use the four screws included (or appropriate fastener) in the

parts bag to securely mount the junction box so that it can

be easily accessed (see Figure 6). The electrical supply can

be connected in two ways:

Figure 6

(_ Dishwasher

"_/

I Electrical

Supply[

L Juno

,_w!th d!shwas hery

Figure 7

Method A - Three prong plug and receptacle

Use the included

three-prong

plug and junction

box to

connect to a dedicated household

receptacle. Make sure

the household

receptacle

meets the electrical

supply

requirements as well as national and local codes.