Airspan Sprint AIRAVE 4 LTE Installatiehandleiding - Pagina 11
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Airspan Sprint AIRAVE 4 LTE. Airspan Sprint AIRAVE 4 LTE 14 pagina's.
Pagina afdrukkenAIRAVE 4 LTE Installation Guide
3 Troubleshooting - Sprint AIRAVE 4 LTE
There is a Reset button located on the back to the left side of the Ethernet port.
Note:
To prevent it being pressed accidentally the Reset button is accessible only by a pin or
similar thin object.
A short press (less than 9 seconds) will initiate a reset of the unit
A long press (more than 10 seconds) will reset the unit to its factory default
Table 1: LED Display
LED
Color & Pattern
Solid Green
Blinking Green
Solid Red
WAN
Blinking Red
Off
Solid Green
Solid Red
C-NET
Blinking Red
Off
Solid Green
Solid Red
L-NET
Blinking Red
Off
Solid Green
GPS
Solid Red
DUG01508-SP
Description
WAN port is connected to peer and
has obtained an IP addresses over the
local network.
Acquiring IP Address. (DHCP process)
Port is not connected or switch failure.
The device is initializing
SW Loading
CDMA IPSec Tunnel established
CDMA IPSec Tunnel is down.
CDMA IPsec establishing
SW Loading
LTE IPSec Tunnel established
IPSec tunnels is down or has not
established a connection. (More than
15 minutes)
IPSec tunnel is establishing a
connection. Blinks as long as tunnel
still establishing.
Tunnel have gone down for less than
15 minutes.
SW Loading
GPS device has acquired a lock and is
ready.
GPS error. GPS has not achieve fix
since Boot up (30 minutes or more)
Airspan Commercial and Internal Use
User Action
None
Wait
Connect Ethernet
Cable.
If continues –
Contact Sprint
Wait
None
Contact Sprint
Wait
None
Contact Sprint
Wait
None
Verify external
antenna is
connected and
located outside.
9