Dragon Wholesaling CR300 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dragon Wholesaling CR300. Dragon Wholesaling CR300 2 pagina's. Crusher

CR300 Crusher

Quick start guide

1. Move throttle to ½ open

2. Open choke fully to the left

3. Turn machine ON key clockwise

4. The start button will flash green,

press until the engine starts.

Release the button as soon as the

engine starts

5. Move the choke fully closed to

the right

6. Allow engine to warm up before

Fully opening throttle to the left

If buttons light up solid blue,

throttle has been left in the off position

Move throttle lever fully to the right, into the stop position . This will turn off the fuel and stop

the engine in one action.

The machine will turn off automatically after 10 seconds.

NOTE: Do not try to turn the key to the off position to turn off engine, use throttle lever.

Should the machine need to be stopped in an emergency, push one of the red E-Stop

buttons and turn the throttle off. These are located at each end of the machine and will stop

the engine and disable the drive to the crusher jaws. The engine cannot be restarted until the

activated E-Stop button is reset. Before resetting the E-Stop button inspect the machine to ensure

it is safe to continue operation.

Starting the Engine

Throttle Lever

Opens to the right

(Top, Black)

Choke Lever

(Bottom, Grey)

Stopping the Engine

Emergency Stop

If buttons flash blue from left to

right, E-Stop needs resetting

Machine

ON key