DRAGONFIRE 11-0800 Installatie-instructies - Pagina 3

Blader online of download pdf Installatie-instructies voor {categorie_naam} DRAGONFIRE 11-0800. DRAGONFIRE 11-0800 4 pagina's. Universal led chase light, 27”/36” led chase light, black housing

Pagina afdrukken

Step 5: Run the Rocker Switch wire harness to the dashboard. Connect the wires to the rocker switch, then install the rocker

switch on your dashboard. Recommended hole size for the Rocker Switch is 1.43" x .850".The rocker switch powers

the Chase Light. Connect the Battery Terminal Cables to the battery. Figure E shows how the rocker switch should be

connected.

Step 6: Run the Push Button Cycle Switch wire harness to the dashboard. Drill a hole on your dashboard with a .56" Drill Bit,

and install the Push Button Cycle Switch on your dashboard. The Push Button changes the Flashing Amber Light

pattern. There are a total of 7 patterns to choose from. Figure G shows the Push button Cycle Switch.

Note: Chase Light Diagram displayed in Figure F.

For further assistance please contact us at

[email protected], or by phone at

1-800-708-9803.