DRAGONFLITE 95 8811 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DRAGONFLITE 95 8811. DRAGONFLITE 95 8811 16 pagina's. Racing sailboat

DISPLAY STAND ASSEMBLY

1 Identify all stand components from box.

2 Bolt the plastic moulded components together with the twelve nut & bolts supplied.

3 Construct the leg sections. Note: All leg and stretcher tubes are of equal length.

4 Fit the three stretcher tubes.

5 Fix the soft EVA foam supports to the top surface of the stand to protect the Hull from scratches.

KEEL & KEEL BULB ASSEMBLY

1 Identify all Keel & Bulb components from box.

2 Insert plastic 'Shoes' into bulb slot.

3 Tip: To make it easier to align the bolt holes in the Fixing Disk, mark the centres of the threaded holes on the side of the Fixing Disk.

4 Insert the Fixing Disk into the pre-drilled hole in the Keel taking care to align the threaded holes and screw in the hex-head bolt to

ensure everything is aligned correctly. It's a good idea at this point to stick the disk in place with a piece of thin tape to prevent it

moving whilst fitting into the Keel Bulb. Then remove bolt.

5 Slide the Keel into the Bulb, between the Plastic Shoes and secure with the hex-head bolt.

6 Repeat step four for the top fixing.

7 Slide the top of the Keel into the Hull and secure with the remaining hex-head bolt.

I N S T R U C T I O N M A N U A L